We offer 1 to 3 year warranty on the market for our equipment, servicing throughout entire country, and a very effective supply of spare parts. Once the warranty maintenance is over, we provide further maintenance services.
Combined Hardness Tester NOVOTEST T-UD3
Combined Hardness Tester NOVOTEST T-UD3
Combined hardness tester combines two methods of measuring hardness: Ultrasonic Contact Impedance (ASTM A1038) and Leeb (ASTM A956). This makes the device the most versatile portable device as it can be.
ABILITY OF CONNECTING BOTH METHODS PROBES WITHOUT TURNING OFF THE DEVICE
The main advantages of the Combined Hardness Tester NOVOTEST T-UD3 are:
The user can measure the hardness of completely different metal products of different shapes, structures, materials and the degree of surface preparation with same unit, just replacing probe.
MEASURING HARDNESS OF SMALL PRODUCTS
Using this device, the operator can, without additional fixation and accessories, carry out hardness testing of products weighing just 100g or even less.
MEASURING HARDNESS OF COMPLEX SHAPED PRODUCTS
Also, with the help of the ultrasonic probe, the user will be able to solve the tasks of measuring the hardness of grooves, surfaces of small radius, inaccessible places and products of complex shape.
SMALL IMPRINT OF UCI TYPE PROBE
Due to the fact that the UCI probe has a penetration depth of only a few microns, it becomes possible to work with products with high print requirements (the maximum non-destructive method is required), as well as measure the hardness of hardened layers, such as nitriding and cementation.
MEASURING PARTS WITH BAD SURFACE
Using a dynamic probe (Leeb probe), the user can test the hardness of massive products with poorly prepared surfaces. The method also allows to measure products with a coarse-grained structure without a significant dispersion of measurements.
CALIBRATED FOR DIFFERENT MATERIALS AND SCALES
Thanks to the presence of built-in calibrations of the Leeb probe for various materials and scales, the device becomes a universal tool for measuring hardness for most common metals.
BUILT-IN CAMERA
The device has a built-in camera, which allows the user to store a measurement archive of images of the tested objects with binding of hardness to a specific place on the product.
Advantage
Specifications
Available options
Media
Advantage
- Small indenter imprint (suits for mirror surfaces of shafts necks, blades, gear teeth, etc.)
- Measuring surface hardened layers hardness
- Wide range of hardness testing
- Various measurement modes
- 88 combinations of materials and hardness scales (calibrations)
- Calibration of any scale in any range
- Convenience and ease of measurement
- Optimized number of buttons
- Large full-color graphic display with bright backlight
- Built-in photo camera for thorough reports
- Automatic probe types recognition
- Connected probe types indication
- The calibrations are stored in UCI probe memory
- Extended operating temperature range (frost, down to – 40°C)
- Internal memory and communication with a PC
- New intuitive menu with tips on the buttons
- Optional wireless mini printer
- Waterproofed housing
- Rubber bumper protected housing
- Internal clock
- Hardness value measuring for any mass products with more than 1 mm thickness (small parts, thin-walled structures, pipes, tanks, steel sheets, articles of complex shape, hardness testing of metal coatings, etc.)
- Different operating modes:
- Graph – the graph building mode
- Histogram – the histogram building mode
- Statistics – provides statistics for the current set of measurements
- Smart – filters the incorrect measurements
- Signal – displays the probe signal (only for the Leeb probe)
Specifications
Range of hardness
– Rockwell, HRC
– Brinell, HB
– Vickers, HV
20 – 70
90 – 650
230 – 940
Measurement accuracy:
HRC: 2HRC
HB: 10HB
HV: 15HV
Standards:
ASTM A1038
ASTM A956
Materials
Ultrasonic (UCI) probe – pre-calibrated for steel.
Dynamic (Leeb) pre-calibrated for steel, alloy steel, cast iron, stainless steel, aluminium, bronze, brass, copper.
Data storage
Limited only by the memory card up to 32Gb
Language
English
German
French
Russian
*additional languages available by request
Dimensions, cm
33*27*10
Operating temperature range, ° C
-20 to +40
Power supply
DC 4.5 V (3pcs AA batteries)
Batteries life, hours, approx.
10
Weight of electronic unit (without probe), approx.
0.3 kg
Package gross weight
2 kg
Available options
- Protective Pouch with Straps for T-UD3
- Android smartphone or tablet (optionally with IP65) for NOVOTEST Lab App
- Additional UCI probes:
– UCI Probe U1 L3 (10N/HV1)
– UCI Probe U1 L3 (50N/HV5)
– UCI Probe U1 L3 (98N/HV10)
Media
- Combined Hardness Tester NOVOTEST T-UD3. Video review
- Combined Hardness Tester NOVOTEST T-UD3 with photo camera
- Operation with Android Software NOVOTEST Lab for smartphones and NOVOTEST devices
- NOVOTEST hardness tester in your smartphone. Special App make device smarter!
- Screen Recording of hardness tester T-UD3 smartphone application
- Correct UCI probe use for accurate results. UCI Hardness Tester NOVOTEST T-U3 (T-UD3)
More products
More productsWe are oficial distributors of
High quality standards
Maintenance services
Read more
Management system
certificate Iso
9001:2015, 14001:2015
certificate Iso
9001:2015, 14001:2015
Market Leaders
About Us
LLC Technuva was founded in 2011 and today is one of leading supplier of NDT equipment and consumables in the Lithuania and other Baltic States. Our office staff is equipped with modern computer technology and software enabling them to give up to the minute information on prices and availability.
